Air Conditioning Repair Service in Melbourne, FL

Your air conditioning system works hard to keep you cool and comfortable all summer long. But when something goes wrong under the hood, it’ll definitely let you know. Here are some common signs that it’s time to call in Snyder’s repair experts:

Insufficient Cooling

If you’re cranking that thermostat down but your home just isn’t getting as frosty as it should, it could point to a refrigerant leak or failing compressor. Those critical components need to be in tip-top shape to keep up with cooling demands.

Unusual Noises or Vibrations

Grinding, squealing, or rattling sounds are never a good sign. They often indicate an issue with a motor or fan that has a loose component or debris caught in the system. Excessive vibrations can be a precursor to failures too.

Frequent Cycling or Difficulty Maintaining Temperature

Is your AC constantly kicking on and off rapidly or struggling to hold a steady temperature? Could be anything from a thermostat calibration problem to clogged air filters restricting airflow and making it work too hard.

High Energy Bills

If those summer electricity costs are giving you sticker shock lately, an inefficient air conditioner is likely the culprit. Leaks, mechanical failures, and other malfunctions make it run way more than it should.

Water Leaks or Excess Moisture

Seeing any puddles or dampness around your indoor unit? That’s a sign of a blocked-up condensate drain line or frozen evaporator coil that needs professional attention quickly before water damage occurs.

Foul Odors

Funky smells wafting out of your vents should be an immediate red flag. Mold growth in your ductwork, burnt-out components, or stagnant water can all produce those noxious odors. Time for a tuneup!

Complete System Failure

If your AC has completely crapped out and gone kaput, don’t delay – that’s an emergency repair situation. The longer it sits inoperable, the higher the risks of doing permanent damage that could require a replacement.

At the first signs of trouble, it’s always better to get Snyder’s techs out for a diagnostic rather than trying to tough it out. A quick repair can prevent that minor issue from spiraling into an expensive nightmare.

Even a finely-tuned air conditioning system can’t defy time forever. As those summers start piling up, repair issues become more frequent and costly – begging the question of whether to keep sinking money into fixes or just bite the bullet on a full system replacement.

But how can you tell which option makes more sense? Here are some general guidelines:

Age of System

If your AC is over 10years old, it’s likely nearing the end of its expected service life even with diligent maintenance. At that age, replacing may be more cost-effective than repairing.

Repair Frequency

Having to call for repairs every summer is a surefire sign something bigger is going on. Once those bills start outpacing the cost of a new system, it’s time to upgrade.

Energy Efficiency

Older AC units guzzle electricity compared to new ENERGY STAR models. If your energy costs are skyrocketing, the monthly savings could help offset replacement costs.

Refrigerant Type

Systems using R-22 refrigerant are being phased out. Recharging gets expensive, so switching to one using cheaper, eco-friendly R410A makes sense.

Home Remodeling

If you’re doing major renovations or additions, it may make sense to upgrade to a properly-sized AC system built for your new layout and cooling needs.

Repair Costs

As a general rule, if that repair quote exceeds more than half the cost of a new system, you’re likely better off installing a new system and investing in the latest energy-efficient technology.

While repairs can give you more life out of an aging AC, there comes a point where replacement is the smarter long-term investment. Snyder’s comfort experts can assess your system and make an honest recommendation on the right path forward.

There’s no bigger buzz-kill than walking inside after a scorching day only to be blasted by stale, stagnant air. When your AC suddenly stops working, every minute feels like an eternity in that sweltering misery. Before you start sweating through a meltdown, there are a few basic troubleshooting steps worth trying first:

Give It a Break

AC systems have built-in safety controls that will shut them down if something goes haywire. Sometimes giving it 30-60 minutes to reset itself is all that’s needed to get the cool air flowing again.

Check the Thermostat

Make sure that thermostat isn’t just in some whacky setting or running on dead batteries. Try setting it a few degrees below the current room temp to see if it kicks on.

Inspect the Breakers

Head down to your electrical panel and ensure the breaker for your air handler and condenser units didn’t get tripped. Flip it all the way off and back on to reset it if needed.

Change Air Filters

Severely clogged air filters can cause enough airflow restriction to make an AC system freeze up and shut down. Swap them out for fresh ones and see if that does the trick.

Clear the Condenser

While you’re outside, make sure there isn’t any debris, vegetation overgrowth, or obstructions blocking airflow around that outdoor condenser unit. Give it some space to breathe.

Listen for Strange Sounds

If you hear any buzzing, grinding, or whirring sounds coming from the system, unfortunately that likely points to an electrical or mechanical issue requiring professional repair.

If you’ve tried all those basic resets and your AC still refuses to turn over, it’s time to call in Snyder’s team of repair pros. They’ve got the tools and know-how to accurately diagnose and resolve that sudden failure quickly.

When your AC stops working in the middle of a sweltering Melbourne summer, every scorching minute feels like an eternity without that crisp, cool air flowing. Luckily, Snyder’s expert techs can handle most air conditioning repair needs lickety-split:

Basic Repairs

For relatively straightforward issues like a bad thermostat, capacitor failure, refrigerant top-off, or electrical glitch, we’re typically able to get your system back up and running the same day or within 24 hours. These repairs just require some basic diagnostics, minor part swaps, and making a few calibration tweaks.

Component Replacements

When it comes to more involved repairs like replacing a blower motor, condenser fan, or compressor, you’re usually looking at a 1-3 day turnaround. These involve ordering and receiving that replacement part, then taking the time to properly uninstall the old component and button everything up to working order.

Major Repairs

For really extensive repair needs like an evaporator coil leak, ductwork modifications, or dealing with a system that’s just flat-out on its last legs, the process can stretch into a 3-5 day window. Our techs have to meticulously track down all the issues, order multiple parts, and essentially rebuild major portions of the system.

Emergency Situations

Can’t bear the thought of sleeping in a sweatbox another night? Snyder offers premium 24/7 emergency repair services to get your cooling restored ASAP. We’ll have a truck rolling within hours to provide a quick fix for critical breakdowns, even if it’s just a temporary solution until the full repair can be completed.

Snyder always strives to make the repair process as fast and painless as possible!

There are few things more frustrating than feeling that warm air blasting out of your vents when you’re counting on your AC to keep you cool and comfortable. If your system seems to be running but just isn’t delivering that icy payload, chances are one of these common culprits is likely to blame:

Refrigerant Leaks

Your AC’s refrigerant is what allows it to remove heat and humidity from your home’s air. If there’s a leak, refrigerant levels will be low – drastically reducing the system’s cooling ability. Time for a recharge and leak repair.

Frozen Evaporator Coil

Counterintuitively, a frozen-over indoor evaporator coil can also restrict cooling. This ice buildup is usually caused by either a refrigerant issue or airflow blockage that needs to be resolved.

Thermostat Failures

If your trusty thermostat has gone haywire with bad wiring or calibration issues, it may not be able to “tell” the AC to actually cool – just circulate warm air on the fan setting. Thermostat repairs or replacement could fix things.

Clogged Air Filters

Those air filters are critical for allowing proper airflow through your system. When they’re clogged to oblivion, that blockage can cause a similar freezing issue and prevent effective cooling. Be sure to replace them regularly!

Duct Leaks

If you’ve got any cracks, disconnections, or leaks in your ductwork, that cold air could be escaping into attics or crawl spaces before ever reaching your vents. Duct sealing may be needed to restore airflow.

While a warm air AC may seem like an oxymoron, Snyder’s expert techs have seen it all before. They’ll be able to quickly diagnose and repair that root issue to get your cooling back on point in no time!

Absolutely! There’s nothing an air conditioning system loves more than running at peak efficiency to keep those energy costs in check. But just like a car that needs tune-ups, certain repair issues can turn your AC into an energy-guzzling money pit if left unaddressed.

Luckily, Snyder’s surgical repair work can get things running smoothly again:

Refrigerant Leaks

Even a seemingly small refrigerant leak can cause major efficiency issues over time as charge levels slowly drop. Our experts will repair that leak and properly recharge the system for optimal cooling performance.

Failing Components

Whether it’s a struggling compressor, worn-out fan motor, or stuck thermal expansion valve, faulty components make your AC work overtime to do its job. Replacements restore like-new energy efficiency.

Thermostat Problems

If your old thermostat has bad wiring or calibration flaws, it could be forcing your system to cycle on and off erratically – wasting energy. Upgrading to a new smart thermostat provides precision control.

Airflow Restrictions

From clogged filters and coils to ductwork leaks, any blockage that restricts airflow makes your AC labor harder to compensate. Clearing those obstructions reduces that workload.

Electrical Issues

Capacitors, circuit boards, and wiring problems can cause electrical inefficiencies that drain more power while preventing optimal cooling output. Repairs solve both issues.

Even a simple professional tune-up can restore 5-10% cooling efficiency by allowing key components to operate as intended. Why keep paying premium prices to run an inefficient system? Let Snyder’s repair techs work their magic!

As the lifeblood of your air conditioning system, refrigerant plays a vital role in absorbing heat and humidity to keep your home feeling cool and comfortable. But over time, leaks can develop that allow that precious refrigerant to slowly escape – severely hampering your AC’s cooling performance and efficiency.

Here are some of the most common culprits behind those pesky leaks:

Age and Wear

Like anything else, the coils, lines, and components that circulate refrigerant simply wear out as the years go by. Constant thermal expansion/contraction and vibrations can cause microscopic cracks and pinhole leaks to form.

Corrosion and Formicary

Florida’s humid, salty air can be brutal on metal components, accelerating corrosion and formicary corrosion that eats away at coils, fittings, and lines from the inside out.

Improper Installation

If your AC wasn’t installed correctly from the start, excessive stress and strain on refrigerant lines could cause premature leaks to develop. Sloppy workmanship is a frequent culprit.

Formic Acid Damage

That same corrosive outdoor air can mix with condensation to create a potent formic acid that attacks coils and aluminum components. Inadequate coil cleaning exacerbates this issue.

Physical Damage

From lawnmower impacts to storm debris or a stray basketball, physical trauma to refrigerant lines or coils is just asking for a major leak to spring.

Vibration Fatigue

Excessive vibrations from an unbalanced compressor or fan can cause abrasive wear on nearby refrigerant lines over time until they eventually crack or separate.

While some leaks are inevitable as systems age, Snyder’s techs are experts at tracking down and repairing them before cooling performance takes a major hit. With proper repairs and recharging, your AC will operate like new again!

There’s no bigger buzz-kill than firing up your AC only to be greeted by an awful racket of grinding, screeching, or clanking sounds. While your first instinct might be to crank up the TV and try to ignore it, operating your system with those kinds of abnormal noises is a surefire recipe for causing some serious damage.

Here’s why you’ll want to shut it down and call Snyder pronto:

Compressor Failure

If you hear a loud, consistent groaning or grinding sound, it likely indicates the compressor – the heart of your AC system – is on its last legs. Forcing it to run in that condition can lead to complete burnout requiring an expensive replacement.

Blown Bearings

When bearings go bad in fan or blower motors, they’ll produce a telltale screeching or squealing noise as the shafts grind against their housings. Continued operation allows that friction to spread, damaging the motor windings.

Loose Components

Any sort of rattling, banging, or clanking sounds are a dead giveaway that something has come loose and is making contact with the spinning fans or other components. Those impacts can break fins, crack housings, and lead to catastrophic failures.

Refrigerant Leaks

In some cases, those hissing or high-pitched whistling noises could indicate refrigerant is leaking out of your system’s coils or lines. The longer you run it, the lower those levels will drop until you lose cooling altogether.

Electrical Arcing

If you hear a consistent buzzing or sizzling sound, it may mean there’s an electrical arcing situation occurring due to a wiring fault or failing component. That’s an extreme fire hazard that needs immediate repair.

While a little noise here and there is normal for AC operation, any loud, persistent abnormal sounds are a definite sign that something is seriously wrong under the hood. Don’t risk running your system and causing further (expensive) damage! Give Snyder a call so we can inspect, diagnose, and repair the issue properly.

While Snyder’s expert techs are always ready to tackle any repair need, some basic routine maintenance goes a looong way in preventing those issues from cropping up in the first place. Here’s how often you should schedule a tune-up:

Twice a Year

For most residential AC systems, we recommend a professional maintenance visit twice per year – once in the spring before cooling season kicks in, and again in the fall before you switch over to heating mode. This allows a clean slate for peak performance in each mode.

During these visits, our techs will thoroughly inspect and clean the entire system, change filters, check refrigerant levels, test electrical connections, calibrate controls, and more. Think of it as an annual physical for your AC!

Monthly Filter Changes

In between those professional tune-ups, be diligent about swapping out your air filters every 4-6 weeks during peak usage months. Those clogged filters make your system work harder while circulating dust and contaminants.

Quarterly Condenser Cleaning

At least once per season, take a few minutes to hose off the outdoor condenser unit and clear away any debris around it. This prevents airflow restrictions that can lead to compressor failures.

By investing just a little time and money into preventative HVAC maintenance, you’ll save big on costly repair bills down the road. An ounce of prevention really does go a long way! Call Snyder today to get on our maintenance schedule.

There’s nothing quite as unsettling as walking into your home and being smacked in the face with the unmistakable scent of something burning. When that acrid smell seems to be wafting from your air conditioning vents, every second feels like you’re on the cusp of a smoldering disaster. Don’t just cross your fingers and crank up the air freshener – it’s time to take action!

First things first – shut the AC down immediately. Continuing to run your system with an electrical malfunction or overheating component will only feed the flames (literally) and risk things escalating quickly. Locate the AC unit’s power switch or breaker and kill all electricity to it.

Once it’s powered off, take a quick peek at the indoor air handler unit to see if you notice any visible signs of charring, melting wires, or smoke. Don’t go too far out of your way, but a visual inspection can at least help identify if there’s an active fire hazard or not.

If you do spot anything smoldering or see actual flames, evacuate your home and dial 911 immediately. Better to be overcautious than sorry when it comes to potential electrical fires!

For less extreme burning odor situations, it’s still wise to call in Snyder’s repair experts right away before flipping that AC back on. Electrical shorts, failing motors, or stuck contactors can all produce those telltale smells and require professional diagnosis and repairs to resolve safely.

While the cause could be as simple as some dust burning off the heating elements during the first cold snap, any persistent or intense burning smells are a major red flag that something is seriously awry. Don’t let your home go up in smoke – when in doubt, call Snyder’s team to get it checked out ASAP!